G4 Series panels
Setup, everyday use, safety and specifications for the Tabletop G4, Pro G4, Max G4 and Ultimate G4.
What is the difference between the Tabletop G4, Pro G4, Max G4 and Ultimate G4?
Introducing the New G4 Series!. All the G4 models have the same new features and are based on the same electronics, with the following specs:. Their dimensions, treatment area and number of LED’s are the key difference. • The Tabletop measures 12.6”
What's included with my G4 panel?
Every G4 panel comes with the panel, a remote controller, protective eyeglasses and a power cord made for your country's voltage and plug type. Something missing or damaged? Contact us within 7 days of delivery at [email protected] or 877-66
How do I set up my G4 panel?
Tabletop G4 and Pro G4: hang it on a door. Max G4 and Ultimate G4: mount it on a wall. Follow the wall-mount sheet in the box. Prefer a stand?. Floor stands are made for each model, so choose the one sized for your panel. Switch it on. Plug the cord
How do I use the G4 touchscreen?
The main menu shows your current timer and wavelength settings. In NIR mode the panel can look almost off. That's normal: near-infrared light is nearly invisible. See it in the manual: G4 Series User Manual, page 7 (master interface)
What are the presets on my G4?
Your G4 has seven presets. Press Preset on the main menu and choose one. All seven run with pulsing off. Presets are a convenient starting point. You can also save your favourite settings and adjust them over time. See it in the manual: G4 Series Use
How do I change the settings on my G4?
Tap Settings on the main menu. See it in the manual: G4 Series User Manual, pages 8–12 (settings)
How do I set an alarm on my G4?
Your G4 can switch itself on at a set time, so you can start the day with a session. Check that the panel's date and time are correct (Settings, then Date & time). See it in the manual: G4 Series User Manual, pages 11–12 (alarm clock)
I'm new to red light therapy. How should I start with my G4?
Start slowly and build up. Everyone absorbs light differently, so your best settings come from small changes over time. Using too much can cancel out good results just as using too little can. A simple journal of your settings and how you feel makes
What is pulsing on my G4, and should I use it?
Pulsing delivers light in rapid bursts instead of a steady beam, from 0 to 10,000 Hz per wavelength. It's optional, and all G4 presets run with it off. We haven't found strong evidence that pulsing helps or doesn't. It's there for practitioners who w
Who should not use red light therapy with my G4?
Rouge panels are general wellness devices, not intended to diagnose, treat, cure or prevent any disease. Red light therapy contains no UV light and has a very good safety profile, but check with your doctor before you start, especially if you:. Wait
How do I care for my G4 panel?
G4 LEDs are rated for 50,000 hours. Your panel has a 3-year warranty; see Warranty Information in our Returns and Warranty section. See it in the manual: G4 Series User Manual, page 28 (FAQ: maintenance)
What are the G4 specifications?
All G4 panels have eight wavelengths (630, 650, 660, 670, 810, 830, 850 and 1060 nm), 5 W dual-chip LEDs, a 30° beam angle, individual pulse control for each wavelength, a 50,000-hour LED lifetime and a 3-year warranty. For light output, see What is
Updated presets in the new Rouge app
If you own a G4, the presets in the new Rouge app won't match the ones on your panel or in your manual. Here's how each one compares, and how to keep your old routine if you prefer it. Most of the G4's presets ran every wavelength at full power and d
What is the irradiance of the G4 Series?
Irradiance, sometimes called power density, is how much light energy reaches your skin, measured in milliwatts per square centimetre (mW/cm²). It's one of the main things to compare between red light therapy panels, along with wavelength and how even